discount denso diesel injectors 0 445 110 443 dodge cummins injector Factory direct sales

discount denso diesel injectors 0 445 110 443 dodge cummins injector Factory direct sales

#denso diesel injectors#

#dodge cummins injector#

How a common rail injection system work?

A common rail is one of the most important components in a diesel and gasoline direct injection system. The main difference between a direct and a standard injection is the delivery of fuel and the way how this one mixes with incoming air. In the direct injection system the fuel is directly injected into the combustion chamber skipping the waiting period in the air intake manifold. Controlled by the electronic unit the fuel is squirted directly where the combustion chamber is hottest which makes it burn more evenly and thoroughly.


The main advantages of the common rail direct fuel injection can be summarized in reduction of exhaust and noise emissions better fuel efficiency and improved overall engine performance. The system consists of a high-pressure pump injectors a rail and an electronic control unit.


Common rail Injector as one of most important components in common rail injection system It is an accessory that must be replaced at high frequencies in the system.



CHINA-LUTONG is specialize in providing high quality common rail injectors.

The merits of the common rail fuel injection system architecture have been recognized since the development of the diesel engine.Lower fuel pump peak torque requirements. As high speed direct injection (HSDI) engines developed more of the energy to mix the air with fuel came from the fuel spray momentum as opposed to the swirl mechanisms employed in older IDI combustion systems. Only high pressure fuel injection systems were able to provide the mixing energy and good spray preparation needed for low PM and HC emissions. To generate the energy required to inject the fuel in approximately 1 millisecond the conventional distributor pump would have to provide nearly 1 kW of hydraulic power in four 1 ms bursts per pump revolution thus placing considerable strain on the drive shaft. One of the reasons behind the trend toward common rail systems was to minimize the maximum pump torque requirement. While the power and average torque requirements of the common rail pump were similar high pressure fuel delivery is to an accumulator and thus the peak flow rate (and peak torque required to drive the pump) does not have to coincide with the injection event as is the case with the distributor pump. Pump discharge flow can be spread out over a longer portion of the engine cycle to keep pump torque demand more even.
delphi injectors
delphi injectors diesel
delphi injectors factory
delphi injectors for sale
delphi injectors volvo
Denso CR Injector Parts
denso delphi common rail injectors
denso diesel fuel injectors
Denso diesel injector
denso diesel injectors
Denso Fuel Injector
denso fuel injectors
denso fuel injectors online
Denso Injector
denso injector assy
denso fuel injectors
denso fuel injectors online
Denso Injector
denso injector assy
dodge cummins bosch fuel injectors
dodge cummins bosch injectors
Dodge Cummins Diesel Fuel Injectors
dodge cummins diesel injectors
dodge cummins fuel injectors
dodge cummins injector
Dodge Cummins Injectors
dodge cummins injectors for sale
Dodge Diesel Fuel Injectors
dodge diesel injectors
dodge diesel injectors for sale


E-mail:fuelinjectionparts@hotmail.com
WhatsApp:+8613666931970
QQ :2850613608

DEC GAO